CLOSE
CLOSE
This is our technical section aimed at our customers; a blog with information on the safety of industrial machines. We hope that through this BLOG, or the queries that can be made to us, we can help you put your machinery into regulations.
On this page we give solutions to your problems. We sell safety laser system, category IV model DSP, which can be installed or advised so that you can mount them yourself at a very economical price.
Any machine that is in service within the EEC (European Economic Area) must comply with the required health and safety regulations.
If the start up has been carried out as of January 1, 1995 (date included), it is mandatory that it complies with this Directive 2006/42/CE, on the contrary if the start up dates before January 1, 1995 only requires that a “MACHINE ADEQUACY”, be made, which in compliance with Real Decree 1215/97.
According to article 3 of this RD 1215/97, the employer must take the necessary measures so that the work teams that are made available to the workers are adequate to the work that must be performed and conveniently adapted to it, in order to guarantee the safety and health of workers when using such work equipment.
The RD 1215/97 in its Annex II, clearly sets out the Provisions regarding the use of work equipment, expressing in point 1.3 the change in intended use, “The work equipment may only be used in a way or in operations or in conditions not considered by the manufacturer if an assessment of the risks that this would entail has previously been carried out and the relevant measures have been taken for their elimination or control. ”